[hprose]

I just recently got a Tormach PCNC1100 with Mach3. Could someone please help
me with the correct settings for the post in onecncxr3? Not really sure if they should match, be different on the controller and the cam software within OnecncXR3. I have tried a number of combinations that just
confuse the machine.

Thank you in advance,

Henry Rose

[MichaelHenry]

Did you see this on OneCNC's web site:

CAD CAM CNC software solutions by OneCNC CAD/CAM

One of the FAQs indicates that they will revise or create posts free of charge if one doesn't already exist. It also sounds like you could edit your own if you feel up to it.

Mike

[partsman]

I have OneCnc XR4 but it has a Mach3 post that works perfectly. I did have to play with the incremental/absolute settings to get things to work the first time though. If XR2 does not have the Mach3 post then just email OneCnc. They are very helpful.

[Bill French]

Try MPFAN post I have 2 and it works fine.

Good luck

Bill

[hprose]

I want to thank all of you for these suggestions. I will try your suggestions and when I get this thing stable will post the changes.

Thank you all,
Henry Rose