586,069 active members*
3,321 visitors online*
Register for free
Login

Thread: Mazatrol 640T

Results 1 to 3 of 3
  1. 03-06-2012, 12:43 PM #1
    Doubleddaved
    Doubleddaved is offline Registered
    Join Date
    Mar 2006
    Posts
    48

    Mazatrol 640T

    Machine goes home in both the x and z axis,but when the operator runs any programs he gets a 120 alarm that says "120 soft limit +x" as some as he hits cycle start.
    I know close to nothing about this machine .He mentioned that he did change batteries with the machine powered off,could he have lost some parameters for this.Stepping through the parameters I do see some different ones than listed in the list that came with the machine.Does someone have the parameter number for the soft limit alarm so I can check it out?
    Thanks
    Dave
    Reply With Quote Reply With Quote
  2. 03-08-2012, 05:46 AM #2
    psharp1
    psharp1 is offline Registered
    Join Date
    Feb 2012
    Posts
    26
    If you have a Fusion 640T, there is an internet card in it that Mazak can connect with and up load the correct parameters that came with it. PSharp1
    Reply With Quote Reply With Quote
  3. 03-08-2012, 07:17 PM #3
    MrMazak
    MrMazak is offline Registered
    Join Date
    Dec 2007
    Posts
    300
    Could be a tool data error and the index parameter is set to index X clearance position and you have a 0.0 in one of the tool set numbers. Make sure parameter P17 is set to 1
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mazatrol Fusion 640t Nexus 250 my
    By Hoosier Bird in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 06-30-2011, 03:16 PM
  2. Mazatrol Dual Turn Fusion 640T (Door lock question)
    By Sammeh in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 12-22-2010, 04:06 PM
  3. Gibbs post for Mazatrol 640T or T32
    By Dinh Hoang in forum GibbsCAM
    Replies: 1
    Last Post: 10-14-2009, 10:43 PM
  4. proglem with 640t
    By uperez in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 11-15-2008, 07:40 PM
  5. pc fusion 640t
    By strecha in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 11-08-2008, 05:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules