I've just ordered one o these,I think they will do for engraving on wood and plastics? I mean look at that price and they're 950w 11 to 18volts.
Turnigy D3548/4 1100KV Brushless Outrunner Motor uk seller D1 | eBay
I've just ordered one o these,I think they will do for engraving on wood and plastics? I mean look at that price and they're 950w 11 to 18volts.
Turnigy D3548/4 1100KV Brushless Outrunner Motor uk seller D1 | eBay
Looks good, let us know how you get on with using it.
Tweakie.
CNC is only limited by our imagination.
It isn't a bad way to go but you can't use them directly. Here is a thread with a lot of links on the subject: http://www.cnczone.com/forums/taig_m...ss_motors.html
There is a current thread on MadModder: Brushless DC Motor Spindle by c raynerd
Here is a link to the MyCncUk thread he mentions: Diy brushless spindle
And another for good measure: BUILD LOG: Using RC Brushless motors as spindle
good luck and post results!
bob