As I said before, your spindle and tool choice will be the limiting factor in how fast you can cut. 100ipm is actually very slow. You're current machine should be capable of 3 times that, if the spindle is up to it.
As I said before, your spindle and tool choice will be the limiting factor in how fast you can cut. 100ipm is actually very slow. You're current machine should be capable of 3 times that, if the spindle is up to it.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)