586,329 active members*
4,864 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > Trying to get a proLIGHT 2000 up and running

Thread: Trying to get a proLIGHT 2000 up and running

Results 1 to 2 of 2
  1. 03-26-2012, 08:28 PM #1
    voltsandbolts
    voltsandbolts is offline Registered
    Join Date
    Aug 2005
    Posts
    437

    Trying to get a proLIGHT 2000 up and running

    Hello,

    I am trying to get a proLIGHT 2000 up and running. I am setting it up at work.
    The machine is from 1996 I believe and was used for 7 years and stored for 7ish years.
    I have the users guide and controller program. I will be running it on a Win98 PC that will let me exit Win to DOS, I plan to try and fire it up soon.
    Are there any words of advice or warnings for things to watch out for?
    I can’t find a serial number on the machine, but the spindle motor was made July of 96 if I read the date code right (9631) It is a 7200 rpm DC motor so I am guessing this machine has the 5400 RPM spindle (1:0.75) reduction?
    Any info you can offer would be welcomed.
    Thanks.
    Rob.
    Deeds not words...
    VoltsAndBolts runs RC for the builder. http://www.voltsandboltsonline.com/ My Forum
    Reply With Quote Reply With Quote
  2. 01-24-2013, 08:47 PM #2
    chalio
    chalio is offline Registered
    Send a message via Yahoo to chalio
    Join Date
    Nov 2008
    Posts
    43
    Did you get your machine running?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Need ProLight 2000 ATC Software & Help
    By dcencer in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 02-05-2009, 08:57 AM
  2. Prolight-2000 Manuals
    By toddnv in forum Benchtop Machines
    Replies: 5
    Last Post: 07-31-2008, 06:16 PM
  3. prolight 2000 atc setup
    By Toyhacker in forum Benchtop Machines
    Replies: 0
    Last Post: 10-28-2007, 12:01 AM
  4. Prolight 2000 error message
    By Toyhacker in forum Benchtop Machines
    Replies: 0
    Last Post: 10-26-2007, 09:21 PM
  5. Looking for ProLIGHT 2000 Manuals/Info
    By dcencer in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 12-27-2005, 03:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules