So I made a 5x4x1" vacuum fixture for my HAAS VF-3YT, and I'm going to use a RobinAir High Performance Vacuum. I saw a water trap made my Nemi, but they start off at around $300 for what looks like almost a simple refrigerator water filter.
I was wondering if anyone recommends a cheaper equivalent? Will any filter with a trap work? And is there one that you recommend specifically?
Thanks, this forum's been a huge help.
Thread: Water Trap for Vacuum Fixture?
Results 1 to 2 of 2
-
03-30-2012, 08:01 PM #1
Registered
- Join Date
- Apr 2009
- Posts
- 13
Water Trap for Vacuum Fixture?
-
03-30-2012, 09:25 PM #2
Gold Member
- Join Date
- Jul 2005
- Posts
- 12177
A simple water filter housing works fine.
http://www.cnczone.com/forums/work_f...ompressor.htmlAn open mind is a virtue...so long as all the common sense has not leaked out.
Reply With QuoteSimilar Threads
-
Vacuum Fixture
By jweinhold in forum Work Fixtures / Hold-Down SolutionsReplies: 2Last Post: 10-11-2013, 07:57 PM -
Double Sided Gasket vacuum Fixture
By diyengineer in forum Work Fixtures / Hold-Down SolutionsReplies: 113Last Post: 10-03-2011, 10:10 AM -
oil canning and chill markd or vaccume trap?
By rwolf in forum Vacuum forming, Thermoforming etcReplies: 9Last Post: 07-16-2010, 10:46 PM -
Vacuum Fixture HELP!
By project5k in forum Benchtop MachinesReplies: 29Last Post: 02-04-2009, 07:40 PM -
Pump for vacuum fixture
By DAB_Design in forum DNC Problems and SolutionsReplies: 7Last Post: 07-04-2004, 12:17 PM
Posting Permissions
