[Melody-gweike]

1. Red Dot

Gives position of the laser. So you can check very easily what's your work going on.








--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

2. Auto focus

Instead of the focal length ruler.

The laser will have a fixed focal length.







--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

Auto focus working video

[ame="http://http://www.youtube.com/watch?v=7xwz-ADo-lo"]http://http://www.youtube.com/watch?v=7xwz-ADo-lo[/ame]

[Melody-gweike]

3. up-and-down platform

Without it, you can only work on material within 5cm height.
If this equipped on a machine, the up-and-down distance of the platform can be 40cm.
It is very helpful for some thick material work.
Also it is the basic accessory for auto focus, rotary.



--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

up-and-down platform video

[ame="http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNFnMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go="]http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNFnMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go=[/ame]






--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

4. Rotary

For cylinder working.

There are two styles of rotaries.

1. New style with clips suitable for bottles & mugs which have bottom



--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

another photo of new style rotary

[Melody-gweike]

New style Rotary Laser Engraving video
[ame=http://www.youtube.com/watch?v=ghsST_A83Ck]gweike laser engraving machine engraver rotary engraving - YouTube[/ame]









--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

2. We call it old style rotary. But it has its advantages.

It is used for cylinders which have not bottoms as tubes. and also Ok for bottles.







--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike

[Melody-gweike]

5. Water chiller

This one is suggested very much

3000W for small machines smaller than 900mmX600mm
5000W for larger machines

Water chiller takes place of a water pump. It can not only make your machine more beautiful but also can protect & cool the water in the tube so that make the tube's life longer.




--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike