504,087 active members
5,951 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jan 2007
    Posts
    99

    My Bore has a taper ??

    Any ideas guy? (and Gals)
    when boring my bore diameter is coming out tapered.
    check lots of stuff on the machine and everything seems ok.
    when I bore 30mm to 60mm depth my bore comes out bigger, the deeper I go???
    At first I thought it was boring bar deflection, but that would cause it to be smaller diameter, the deeper I go....
    Any ideas???

  2. #2
    Gold Member
    Join Date
    May 2004
    Posts
    4519
    How much taper? What lead-in angle on your tool? Tool could be digging in as it cuts. Could be misalignment of machine. Do you also get taper on OD? Could be part push off at a greater distance away from chuck. As the cut gets closer to the chuck it become more rigid.

Similar Threads

  1. Difference in Female Taper angle using Taper Cutter
    By Buntron in forum General Material Machining Solutions
    Replies: 5
    Last Post: 06-07-2011, 06:53 AM
  2. NPT Taper-to-Straight-to-NPT-Taper Thread
    By bdyenter in forum General Metalwork Discussion
    Replies: 2
    Last Post: 09-16-2009, 02:10 PM
  3. SL10 id bore taper?
    By FUN4ME in forum Haas Lathes
    Replies: 5
    Last Post: 03-13-2009, 07:55 PM
  4. Macro Programming for Taper Bore machining
    By yaji63 in forum G-Code Programing
    Replies: 30
    Last Post: 05-22-2008, 04:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •