hey guys i have a mazak 510c and im using a renishaw ts27r tool setter ..... i understand how to indicate in a exact tool length to check my setter .... and the tool setter is off .008'' i have indicated the top of the tool setter to make sure it is level and adjusted it accordingly . my issue is i cant find any where that tells me where and how to calibrate the tool setter to get the length and diameter correct. any help on this is greatly appreciated .
please post any helpful links are informative information you may have to help me
Results 1 to 2 of 2
-
04-14-2012, 11:28 AM #1
Registered
- Join Date
- Apr 2012
- Posts
- 0
Mazak 510c renishaw ts27r tool setter help ?
-
04-14-2012, 01:46 PM #2
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Contact Renishaw.
Reply With QuoteSimilar Threads
-
Renishaw Tool setter rookie
By mishikwest in forum Haas MillsReplies: 16Last Post: 08-10-2011, 06:06 PM -
Leveling Renishaw OTS (tool setter)
By parkson in forum Haas MillsReplies: 7Last Post: 06-09-2010, 09:11 PM -
Renishaw TS27R tool setter on HAAS machine.
By JasonR in forum Haas MillsReplies: 2Last Post: 09-23-2009, 07:36 AM -
OTS Renishaw Tool setter help, Actually using it?
By mgb1974 in forum Haas MillsReplies: 20Last Post: 06-02-2008, 02:54 PM -
OTS Renishaw Tool setter help
By mgb1974 in forum Haas MillsReplies: 6Last Post: 03-18-2008, 12:19 PM
Posting Permissions
