Welcome. You are new to Sprutcam so please bear with us. when using 4-axis or the zero point must be set in the workpiece axis and on the machine? If I be using to base the hole that is not in the axis, will generate a program is correct?
Results 1 to 1 of 1
-
04-14-2012, 03:59 PM #1
Registered
- Join Date
- Apr 2012
- Posts
- 13
axis of rotation, the position of the zero point
Reply With QuoteSimilar Threads
-
Rotation along the y axis?
By HereinCS in forum DIY CNC Router Table MachinesReplies: 1Last Post: 07-09-2010, 05:27 PM -
B axis rotation
By fitzpatrick2362 in forum MetalWork DiscussionReplies: 0Last Post: 10-12-2009, 12:06 PM -
using 4th axis toolpath posts out point to point on A axis?
By tnik in forum SurfcamReplies: 2Last Post: 02-07-2009, 12:59 AM -
Computing Cable Rotation From XYZ Point Data
By FishGuy876 in forum Uncategorised CAM DiscussionReplies: 0Last Post: 09-17-2007, 07:55 PM -
X axis to A rotation
By quemast in forum G-Code ProgramingReplies: 6Last Post: 06-18-2006, 02:36 AM
Posting Permissions
