I have some oblong punches that are say 21mm X 27mm and I would like to have the diameter ground to 20.5mm X 25.5mm
Can anyone do this?
I have some oblong punches that are say 21mm X 27mm and I would like to have the diameter ground to 20.5mm X 25.5mm
Can anyone do this?
I might be able 2 grind the punches 4 U. I need a print, Bill
Thanks for your response. I ended up cutting them with a carbide endmill and dusting off the top. Words great!!
If you ever need this service again please email me. I have software to grind an eliptical punch on my Jungner CNC grinder.
I will try to remember the next time a project like this comes up.