Originally Posted by
jvangelder
Does such a thing exist? I only need approx 1deg accuracy, no more than 180deg of rotation, 3-12vdc operation and a simple 3 wire hookup like a normal hobbie servo. I dont need encoder feedback, temp, etc.
-Jacob
Servo? position to 1deg? no encoder?
Sounds like you need a stepper, .9deg 1/2 step.
Originally Posted by
jvangelder
Also i only need around 150 in/ft of tq peak,
in/ft????
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.