Hi,
In continuous mode it is plenty fast, but if I set the step jogging mode and set it for 1" for example, it moves very slowly. Is there a place to set the speed for STEP mode jogging?
Thanks,
Alan
Hi,
In continuous mode it is plenty fast, but if I set the step jogging mode and set it for 1" for example, it moves very slowly. Is there a place to set the speed for STEP mode jogging?
Thanks,
Alan
I believe it moves at the current feedrate.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)