[Parameter]

Would you ship to Canada, your ebay site only says US? I'd love to have 2 of those nuts.

Para

[widgitmaster]

Eric-

Nice work. I'm looking for a minimal mess cutting lube/coolant system and I noticed the feed lines to a lube on your mill, can you tell me what you're using on your mill and how well it works and if you would recommend it?

Thanks,

Paul T.

I got the tankless "KoolMist" unit m# 891-5987 from enco.com
http://www.use-enco.com/CGI/INSRAR?PMSECT=0002003608
(requires an air compressor)
Also got a gallon of their coolent mix, It works really well when mixing 2-shotglasses to 1-gallon of water. Too much hurts my nose, too little rusts the machinery!

I hang the jug on the back of the machine, mounted the on/off valve to the ram for easy access, ran the knozzle down close to the cutter. Knozzle is adjustable, more air less liquid / more liquid less air...
When cutting plexiglas, it gives an almost polished finish!

Eric

[widgitmaster]

Would you ship to Canada, your ebay site only says US? I'd love to have 2 of those nuts.

Para

Yes, I'll ship to CANADA!

Send me a privaste msg with contact info.
Skip eBay, Good deals for "Zoned" customers!

Eric