Hello, I was told that if I add a G64 to the beginning of my code it will turn on cv in mach3 so my part will cut smoother. So I created my cam part and edited the g-code then tried cutting the code in Mach but it didn't do anything different. Now when I go back to try and edit again to try it over because didn't work he first time it says "can't get g code file. The only way I know how to fix it is to delete the whole cam part and start it over. That still leaves me with the problem of editing it. Is there a way to edit the gcode and still be able to return to it through solidcam. P.S. I also "saved as" the edited code to the part. Thank you for any help.