[DarkStarMedia]

I accidentally ordered an extra lower AC bearing.... my loss your gain.. I paid $65 for it... Yours for $50 shipped USPS... I can take paypal for speed... Brand new SKF and it's the optimized internal design.... 7207 BECBM.

I figured someone here might have a use for it...



Thanx,
Richard

EDT: if this for sale ad isn't ok let me know...
EDT2: PM me or respond here and we will take care the shipping/payment off-list.

[Cruiser]

Save it for future useage !
Bearings don't last forever and stuff happens, I have my second set running in my spindle now.

[DarkStarMedia]

Next time I do bearings I will use ABEC-7 and a new spindle housing....

I'd rather get some money out of this one now...

Richard

[DarkStarMedia]

No one? Really? :stickpoke I thought it was a good deal...

Richard

[Mark Housel]

Richard,

I'll expose my ignorance here.

I have no idea whatever what a "lower AC bearing" is, or what mill it might be useful for?

Mark

[DarkStarMedia]

Richard,

I'll expose my ignorance here.

I have no idea whatever what a "lower AC bearing" is, or what mill it might be useful for?

Mark

The IH mill has 2 spindle bearings... a lower one and an upper one. All the RF-45's may be the same but I don't know.

Normally they come with tapered roller bearings, I purchased Angular contact bearings to replace the tapered roller bearings but I got an extra lower one... so I am offering it here, cheap.

Richard

[Mark Housel]

Thanks Richard

Are the upper and lower bearings the same? Similar?

I know the upper bearing in mine is noisy, particularly at higher RPM's

[DarkStarMedia]

Thanks Richard

Are the upper and lower bearings the same? Similar?

I know the upper bearing in mine is noisy, particularly at higher RPM's

the upper bearing should be a 7206 based bearing (a bit smaller). You replace them in pairs anyway.

I am planning on swaping mine out this weekend if my Kluber bearing grease shows up.

Richard