[automationtechinc]

If you have a group to buy KL-6090 CNC router, you get a additional $100 coupon/each machine

check here

CNC Router, Stepper Motor, Servo Motor, Power Supply Automation Technology Inc

[gmbrittain@gmai]

Stay away from this machine. It is a dog. It came in with paint slopped on with a brush, 50% of the electronics were bad. It had to be completely rewired due to bad solder joints.
Customer service from John, at Automation Technology starts out nice, then quickly turns to bad Chingish, then no reply at all. A total nightmare!!!

Mike Brittain
[email protected]

[automationtechinc]

Stay away from this machine. It is a dog. It came in with paint slopped on with a brush, 50% of the electronics were bad. It had to be completely rewired due to bad solder joints.
Customer service from John, at Automation Technology starts out nice, then quickly turns to bad Chingish, then no reply at all. A total nightmare!!!

Mike Brittain
[email protected]

Mike:

if you need any help, call us or email us, we will help you

http://www.automationtechnologiesinc...age/cnc-router

[JustWood]

A bad quality built machine? Cheap price!