Does anyone have an X4 Post file for Fanuc10M (OKK). OR can give directions on modifying a default post.
I need to break up the way a tool change is done. My control doesn't like the M06 on the same line. Mastercam spits out T4M06 though.
Thread: Post File for OKK Fanuc10M
Results 1 to 2 of 2
-
07-04-2012, 07:50 PM #1
Registered
- Join Date
- May 2012
- Posts
- 32
Post File for OKK Fanuc10M
-
07-04-2012, 08:31 PM #2
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
the default post being Fanuc should work or look at the MPMasterpost here.
Post Processors - eMastercam.com(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With QuoteSimilar Threads
-
Need gibbscam post file.
By randypage in forum GibbsCAMReplies: 6Last Post: 05-23-2012, 05:08 PM -
Mori Seiki JR + fanuc10M
By PBr in forum DNC Problems and SolutionsReplies: 0Last Post: 05-27-2011, 02:19 PM -
post file extension
By GRANDPA in forum MastercamReplies: 3Last Post: 03-22-2007, 04:44 AM -
I need a post processor file
By cncadmin in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 08-21-2004, 03:57 AM
Posting Permissions
