[cheesypoof]

Requesting a quote for two small 5086 aluminum (for Marine use) CNC parts. Both are identical except for the typeface used in the logo. Parts to go on a classic boat being restored. The 12-7/8" center to center bolt holes must be precise but there is some leeway in most of the other dimensions as long as the thickness is maintained around 3/8" or more for structural strength. See attachments. One is an example part (the one with the Cobia logo) and the other is the desired part. Parts would need to be shipped (UPS or FedEx is fine). Paypal would be preferred.

Thanks

[cheesypoof]

I am not a machinist so if you have any recommendations for me on how best to get something like this made, please let me know.

I would also be open to having one made from stainless and cut with water jet, with text cut all the way through (no inset).

Thanks

[R1_pilot]

I might be able to help you out, whats your email address?

J

[skray775]

Pretty straight forward in aluminum on a milling machine but I can't help with the water jet info.

email me at [email protected] if you need help.

[slowlearner]

What type of files can you supply for quoting. What is your zipcode for the shipping?

[cheesypoof]

Thanks to all who posted. I have accepted a quote and sent payment. I will post the results when received and hopefully will be doing more business here in the future.