Originally Posted by
mflux_gamblej
Interestingly, the machine will overload even when the spindle is not spinning (cycle start has been pressed, spindle fan motor is spinning).
Thanks for the support guys
Try it without the motor connected, if a SCR or the drive is shorted it will overload/trip in this condition without load.
Originally Posted by
mflux_gamblej
I've been taking lots of pictures along the way, and I wouldn't mind posting some of the instructive ones here - although, it seems difficult to get a picture to show up on this forum.
I usually have no problem, you can resize them with Irfanview if needed.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.