I'm getting some spots where the router stops or at least slows down at curve ends rather than making a nice continuous flowing motion. This is leaving some small digging in spots for lack of a better descriptions when this happens. These are a little hard to sand out.
Any way to make the contour profile cut in a smooth motion?
Results 1 to 5 of 5
-
07-16-2012, 05:49 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 168
Router seems to slow/stop at ends of curves on a contour-way to fix?
-
07-16-2012, 06:00 PM #2
Gold Member
- Join Date
- Jan 2006
- Posts
- 2985
This is from your machine and controller, not from CAM. What machine and controller are you using?
Matt
-
07-16-2012, 06:03 PM #3
Registered
- Join Date
- Mar 2006
- Posts
- 168
That's kind of what I was thinking. G-Code should be G-Code no matter what program spit it out or hand coding was done.
Originally Posted by keebler303
I'm using a Techno Isle 040 machine and their controller and G-Code interface/software.
-
07-16-2012, 06:14 PM #4
Registered
- Join Date
- Dec 2006
- Posts
- 20
It could be caused by the CAM if the post adding a G09 top the code.
Check for that.
-
07-16-2012, 06:42 PM #5
Member
- Join Date
- Jun 2007
- Posts
- 3757
Try a G64 at the top.
Reply With QuoteSimilar Threads
-
Micro torque converter to slow router speed
By technomage in forum DIY CNC Router Table MachinesReplies: 2Last Post: 08-07-2013, 07:34 AM -
How do you get nice smooth curves (almost like bezier curves in photoshop) in Bobcad?
By 777funk in forum BobCad-CamReplies: 1Last Post: 11-08-2011, 05:30 PM -
AXYZ Router Slow on Z moves: Why?
By peetle in forum Commercial CNC Wood RoutersReplies: 0Last Post: 04-15-2010, 03:50 AM -
Monster Router - Progress, albiet slow...
By ewest in forum DIY CNC Router Table MachinesReplies: 9Last Post: 08-22-2007, 10:05 PM -
Router seems slow, any suggestions?
By Hack in forum DIY CNC Router Table MachinesReplies: 16Last Post: 11-09-2004, 02:56 PM
Posting Permissions
