[brcguy]

So I am in Austin TX - I own a TransonCNC 150w 35" x 55" laser, and a Full Spectrum Pro 60 (upgraded to 80).

I am about to order replacement tubes from Reci, for myself and a colleague in Houston. The more stuff we order, the less it costs, and the less shipping per unit.

If you are in TX, LA, or OK and want to get in on this order and save some money, let me know. I do not intend to mark up the cost on anything you add to this order, as I am saving money on what I buy, and that's really enough.

I will handle the shipping and import issues etc. The cost of that stuff will be divided fairly, by the ratio of what you spend to the total cost of the order. If we get enough to make it a pallet, it will cost a lot less than air freight. I can accept credit cards, so you can take advantage of your bank's buyer protection - that way you can be sure I am not a scammer (which I am not)

Don't Wait Until You Have a Failure! Be Prepared!

We can arrange to meet somewhere halfway so neither of us has to drive the whole way roundtrip.


TL;DR - Buy Reci Tubes and Supplies for less by going in with me.


Contact me at brcguy -at- gmail -dot- com

[rutexus]

When are you going to actually order them.

I will order two in probably a month, maybe two.

Have you used one of their 150 Watt tubes before?

Tom

[rutexus]

I forgot to mention, I live in Rolla, MO. Maybe this is too far away to be of any benefit.

Tom

[Lasersolution]

If you want the RECI laser tube, maybe you can purchased them from the RECI factory, but there are many good laser tube now, the price will lower, In fact, in China, more and more factory try the new laser tube now