Hey Guys: I´m trying to figure out how to use the tool life fuction on a John Ford Lathe with a Fanuc O1T control for use with a barfeeder but when i program in the tool life information it only counts the remainder of parts to be machined after reading an m30 or m2 code. I can only run the machine 1 part at a time and can´t run the machine automatically. Does anyone have a sample program or any help on how to over come this problem. Any help would be much appreciated.
Cmobilaah
Results 1 to 2 of 2
-
07-27-2012, 08:40 PM #1
Registered
- Join Date
- Oct 2010
- Posts
- 0
Need some help programming tool life on Fanuc O1T Control
-
10-14-2012, 03:09 PM #2
Registered
- Join Date
- Sep 2011
- Posts
- 78
stil need a solution???
Reply With QuoteSimilar Threads
-
Sample Fanuc Tool change macro
By dpuch in forum G-Code ProgramingReplies: 22Last Post: 06-19-2023, 11:49 PM -
OSP-P200L LT200-MY TOOL LIFE PROGRAM FORMAT
By ET.SC.ENG. in forum OkumaReplies: 1Last Post: 08-06-2011, 08:51 AM -
sample g code program for hitachit 48v fanuc 6mb
By beekeeper in forum G-Code ProgramingReplies: 5Last Post: 08-12-2010, 04:58 PM -
Tool Life FANUC 11M
By Mirko29 in forum FanucReplies: 0Last Post: 04-27-2010, 11:21 AM -
Fanuc oi Mate-TC Lathe (Sample Program)
By Tazzer in forum FanucReplies: 2Last Post: 03-17-2009, 06:10 AM
Posting Permissions
