This is kind of a two part question. one is i have a motorcycle I need to design and was going to do it in turbo cad 9.2 deluxe that i have but can't figure out how to make the bends in the tubing. And the other question is if there is any one in the state of Mn if they read this that might be interested in making a few dollars in putting it in cad for me? I think the second question is kind of in the wrong post but not for sure. Thanks for the help. I love this site.
Thread: tube bending in turbo cad
Results 1 to 3 of 3
-
12-30-2005, 06:12 AM #1
Registered
- Join Date
- Aug 2004
- Posts
- 19
tube bending in turbo cad
-
12-30-2005, 04:50 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Can you extrude along a path in TurboCAD?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
01-01-2006, 07:55 PM #3
Registered
- Join Date
- Aug 2004
- Posts
- 19
thank you for the help that worked
Reply With Quote
Posting Permissions
