[firepoker1965]

Does anyone know if Mastercam can make a "part print"? What I mean by this is the part print that the person making the part would use to check the part they make.You know , it has a title block , orthographic projection and a little isometric view in the corner.

Thanks,

Tony , Tool and Die Maker

[NW_Phil]

ive only been able to print the current wcs view, iso, iso world, tplane or screenshot as idividuals. and having to use leaders etc to show dimensions (created them on a seperate level). if you right click over your ops manager and go to setup sheets it gives you some options. i havnt been able to figure out how to do multiple views at once. one nice feature is tool list (again right click in ops manager) it will give you a sheet with tools used. works nice for setting up if your computer isnt near the machine. would be nice to see if we could do multiple views interesting to see what some of the more experianced guys come up with.

[Superman]

Checkout "Solid layout" in the solid pulldown tab

it gives a 2D drawing of a 3D model ( top front side, plus an iso view in the corner )