I'm looking into getting a bench top cnc mill to start a small buisness making stuff out of acrylic and aluminum. Stuff like big acrylic dealer buttons for poker that I can sell on ebay. My main concern is accuracy and resolution I want to be able to cut parts with complex organic shapes and not have visible faceting so not much if any finishing work is needed. I found what looks to be exactly what I want on ebay but outside of the guys listing I can't find any info on it.
The auction can be seen here
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWA%3AIT&rd=1
Other mills I have looked at have been mostly Taigs they are a bit smaller and don't offer a cnc and manual setup it seems to be one or the other. This mill on ebay does both and runs off of servos so it should be able to cut complex organic shapes better right? I noticed in his feedback he has one negative saying backlash is .018 and he used to post an accuracy claim of .0005 until that negative comment. I can't find any info on this machine outside of his auction and in an email he said he's been building them for 3yrs. If anyone can point me at other machines like this one to look at it would be great. Thanks -Mark