[m.raheel]

hi,
i have redsail x700 engraving n cutting machine but machine give some errors when i give output to the machine from the computer.
error 1. please esc no enough spaces
error 2. esc for exit, enter for continue, when i press tracking XY slopover.
note: when i uncheck X.axis in lasermate software machine give error no.2
error no3. when i give output to machine from the sotfware machine not able engraving position ,, i kept on change engraving position but machine engrave only stay position...
when i tick the checks x.axis, y.axis when machine give 1st error.
error4: when i press the reset button machine mirrors leave their position and i have to set position mirrors again and again, why

please tell error solution

[m.raheel]

help meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[BaiCam]

hi,
i have redsail x700 engraving n cutting machine but machine give some errors when i give output to the machine from the computer.
error 1. please esc no enough spaces
error 2. esc for exit, enter for continue, when i press tracking XY slopover.
note: when i uncheck X.axis in lasermate software machine give error no.2
error no3. when i give output to machine from the sotfware machine not able engraving position ,, i kept on change engraving position but machine engrave only stay position...
when i tick the checks x.axis, y.axis when machine give 1st error.
error4: when i press the reset button machine mirrors leave their position and i have to set position mirrors again and again, why

please tell error solution

UK Rep for Redsail:

I think we need a better explanation to be able to give any help. For instance, error4: pressing reset will NOT affect the mirrors, they are fixed in place manually?

[thunderlaser]

let me see

[TechGraphix]

When i look to the first errors, i think you want to work outside the machines boundaries..
When engraving, your head needs to accelerate. for that it needs some space.
Say you accelerate with 1m/s^2 and want to go over your work with 500mm/s. You need ~0,5 sec to reach that 500mm/s. This is a distance of ~25cm to the left and to the right of your work..
If your work is close to the limits of your workspace, there will be not enough space to accelerate.
See if your acceleration is appropriate (say 3-4G is fast but if your machine can do it without loosing steps..)
See if the definition of your workspace is correct
See if your work is not too close to the limit
Kees