In CNC programming I need a formula to solve these problems to calculate ramp angle. I tried (rise/run)tan-1 and I think that is giving me an interior angle as when converting the problem to a triangle.
Results 1 to 7 of 7
-
10-05-2012, 07:06 AM #1
Registered
- Join Date
- Oct 2012
- Posts
- 0
1 inch - .025 = degrees How to solve these types of problems?
-
10-05-2012, 07:42 AM #2
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Study your trig functions.
-
10-05-2012, 08:16 AM #3
Registered
- Join Date
- Nov 2008
- Posts
- 24
Maybe this one?
Trigonometry problems - Slope angle - Math Open Reference
-
10-05-2012, 08:58 AM #4
Registered
- Join Date
- Oct 2012
- Posts
- 0
Thanks.. I think this is just what I needed.
-
10-05-2012, 09:19 AM #5
Registered
- Join Date
- Oct 2012
- Posts
- 0
I looked at it. The site is saying for me to solve the way I have been doing it. rise/run tan-1(rise/run). My answers are way to small. I keep getting 1-2 degrees.
-
10-05-2012, 12:51 PM #6
Gold Member
- Join Date
- May 2004
- Posts
- 4519
You better be getting the same answer every time. And it better be 1.43 degrees.
Originally Posted by lost
-
10-06-2012, 05:13 AM #7
Registered
- Join Date
- Nov 2008
- Posts
- 24
I never trust myself fully so I usually double check any angle or arc dimensions I'm not sure about with a 2d cad program.
-gk
Reply With QuoteSimilar Threads
-
Fanuc OTC, Change display from INCH/Min to INCH/Rev?
By laka in forum FanucReplies: 4Last Post: 09-11-2012, 10:30 PM -
Milling 1/16 inch metal problems what speed?
By Micro Milling in forum MetalWork DiscussionReplies: 6Last Post: 12-16-2009, 06:49 PM -
Best way to mount 1/16 inch ball mill with 3/16 inch shank in router.
By cjjonesarmory in forum Metalworking- / Woodworking Tooling / Manual MachiningReplies: 10Last Post: 07-02-2009, 11:38 AM -
Problems bending ½ inch pipe
By travis_towle in forum Bending, Forging, Extrusion...Replies: 4Last Post: 03-08-2007, 01:06 PM
Posting Permissions
