Does anyone have the dimension for the holes? I'm at work and i forgot to measure them and i would like to make them at work today. I know they are for 7/16 c'bored hole just need the distance between center to center and the distance from the bottom.
Thanks
Thread: Tormach vise jaw dimensions
Results 1 to 4 of 4
-
09-24-2012, 05:02 PM #1
Registered
- Join Date
- Nov 2005
- Posts
- 201
Tormach vise jaw dimensions
-
09-24-2012, 05:08 PM #2
Registered
- Join Date
- Nov 2005
- Posts
- 157
Lots of datasheets here for the Tormach vice/vice jaws.
It appears that centres are 3.125", not sure about height though.
Vises & Vise Jaws | Tormach LLC | We provide personal small CNC machines, CNC tooling, and many more CNC items
-
09-24-2012, 10:06 PM #3
Registered
- Join Date
- Feb 2006
- Posts
- 1072
The Tormach 5" vise (machinist, not CNC, that is) is a relabed Magnum Mini Mag and the dimensioned drawing for the vise and jaws is currently here
Randy
-
09-25-2012, 02:04 PM #4
Registered
- Join Date
- Nov 2005
- Posts
- 201
Thanks for the info!
Reply With QuoteSimilar Threads
-
Tormach TTS Tool Holder Dimensions?
By plasmator in forum Tormach Personal CNC MillReplies: 5Last Post: 09-03-2012, 05:08 PM -
Tormach + New Shars Vise ....
By twocik in forum Tormach Personal CNC MillReplies: 0Last Post: 04-29-2010, 07:11 PM -
Tormach Deluxe Stand Dimensions ?
By twocik in forum Tormach Personal CNC MillReplies: 2Last Post: 01-30-2010, 09:27 PM -
Soft jaws for the Tormach vise?
By zephyr9900 in forum Tormach Personal CNC MillReplies: 9Last Post: 10-29-2007, 06:13 PM -
Home Made Vise Stop - For 6" Kurt Vise
By widgitmaster in forum Bridgeport / Hardinge MillsReplies: 20Last Post: 12-15-2006, 03:49 PM
Posting Permissions
