Hello, I've got a Takumi V8 that does not move in Y. Have taken the front bearing block off and now am trying to remove the rear block, but can't get the motor coupler off of the screw. Wondered if anyone had any experience getting these apart and if so how to proceed. Thanks in advance for any help.
Thread: Takumi V8 Ball Screw Removal
Results 1 to 3 of 3
-
10-02-2012, 02:01 PM #1
Registered
- Join Date
- Jun 2012
- Posts
- 0
Takumi V8 Ball Screw Removal
-
10-02-2012, 03:50 PM #2
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
Done one on a V10 years ago. Post a picture of the coupling please.
-
10-17-2012, 02:50 PM #3
Registered
- Join Date
- Jun 2012
- Posts
- 0
Sorry for the long delay in getting back on here, only do this part time. Got the coupling apart, it was a taper-lock connection that I was not familiar with. In my former life I was an auto mechanic and now I'm on to fixing mills, so some things are a little different. Thanks for responding.
Reply With QuoteSimilar Threads
-
Z axis to ball screw or not to ball screw
By brian257 in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 03-28-2012, 09:39 PM -
Broken Tap / Screw Removal
By zcases in forum Material Machining SolutionsReplies: 12Last Post: 10-31-2011, 04:45 PM -
what bearing fit with acme screw 1/2 -10(for cheap ball screw)
By apex in forum Linear and Rotary MotionReplies: 4Last Post: 07-27-2007, 05:15 PM -
Ball Screw Removal
By smarbaga in forum Linear and Rotary MotionReplies: 2Last Post: 11-24-2005, 08:56 PM -
New technology.... old debate.....ball screw vs lead screw
By trubleshtr in forum Linear and Rotary MotionReplies: 1Last Post: 08-16-2005, 02:42 AM
Posting Permissions
