good day,
we have a machine here fanuc system 6t, well we can power up the machine but when i pressed the "cycle start push button" it wont start but no alarm or any alarm codes.
1. i already checked, the 24v and there is
2. i checked also the input/output signal(diagnostic) for push button(table no:0039).
3. i also change cycle start relay..door lock relay.
4. checked input/output in all actuator, limit switches it seems all ok..
5. hydraulic motor is running
6. we change the power unit but still the same
but there is one thing that ive notice is the "cycle start indicate"(0003)..there is no output signal in diagnostic view(something like zero or one). so as ive mentioned i checked the voltages across the "cycle start push button" and there is. and i never heard relay clicking.
well, please share if someone encounter or experienced this problem before..
thanks