[Shade]

Hi
I'm chasing after the instructions / discriptions for the m500 machine panel/pop or instructions for setup and using laser manually for alignment purposes as I've lost all my paperwork

Im trying to get my old machine working again so any help would be helpful

Many thx
Shade

[BaiCam]

Hi
I'm chasing after the instructions / discriptions for the m500 machine panel/pop or instructions for setup and using laser manually for alignment purposes as I've lost all my paperwork

Im trying to get my old machine working again so any help would be helpful

Many thx
Shade

UK Rep for Redsail:

Check this link http://www.cnc3axis.com/m500/Redsail...raver_M500.pdf

[Shade]

Thanks for the reply mate
unfortunately Link didnt work

Shade

[BaiCam]

http://www.cnc3axis.com/m500/Redsail...raver_M500.pdf

[rayscott]

I'd like to help for what I can. The RedSail machines are close enough to most Chinese laser machines. Please tell me where you are in your rework process. I'll try to help.

Ray

[BaiCam]

Key Panel:
http://www.robocutters.com/LaserKEYPanel.pdf

Laser Install:
http://www.robocutters.com/M500Installation.pdf

Spec:
http://www.robocutters.com/Redsail_Laser_Engraver_M500.pdf

hope this helps!