586,067 active members*
5,011 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > X3/SX3/G0619/G0463 > Sieg KX3 spindle controller connexion

Thread: Sieg KX3 spindle controller connexion

Results 1 to 2 of 2
  1. 10-10-2012, 08:53 AM #1
    bartdewaele
    bartdewaele is offline Registered
    Join Date
    Oct 2012
    Posts
    0

    Sieg KX3 spindle controller connexion

    hello All,

    I recently bought a SIEG KX3 milling machine, The machine is allready equipped with steppermotors and spindle drive but it lacks the controller.

    I have attached the wiring diagram that came with the machine.
    I do not know how to connect the controller of the spindle. As you can see on the wiring diagram this controller has 4inputs: AVI, GND, START/STOP, F/R.

    I would like to control the spindle RPM with a 0-10V signal that comes out of my CPU board, I "guess" I have to connect this 0-10V signal between GND and AVI. Not sure what I have to do with the START/STOP and F/R input, do they have to be connected to GND to be active, or be supplier with +5v or +10v?

    Your help is welcome
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 04-16-2013, 11:42 AM #2
    diyengineer
    diyengineer is offline Gold Member
    Join Date
    Feb 2010
    Posts
    3447
    Thanks for the print!!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Sieg X3 spindle noise
    By brento in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 07-04-2011, 10:24 AM
  2. Sieg KX3 Spindle Gear
    By NickHaman in forum X3/SX3/G0619/G0463
    Replies: 3
    Last Post: 03-17-2011, 01:43 AM
  3. Question about Xylotex Controller and Sieg X3 mill
    By wwendorf in forum Benchtop Machines
    Replies: 15
    Last Post: 06-02-2007, 12:51 PM
  4. Sieg X1 Spindle
    By itsme in forum Benchtop Machines
    Replies: 50
    Last Post: 01-24-2007, 01:05 AM
  5. Connexion Spaceball
    By dmealer in forum Mastercam
    Replies: 10
    Last Post: 01-27-2005, 08:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules