Hi!
I need help with communication with a closed loop controller from Aliexpress - I bought the driver alone since I already had both steppers and encoders, but I need to access its settings to set encoder configuration (and probably current parameters)
It doesn't work with ProTuner - says Unknown Model.
It has an RJ12 port that seems to have such pinout: 5V, X, X, GND, Rx, Tx. ProTuner sends a sequence (01 03 00 FD 00 01 15 FA), the driver responds with (01 03 02 00 00 B8 44) and then the software says "Unknown Model".
It has a GD32F330C8T6 CPU and RJ12 seems to be connected directly to it (no MAX232 or similar):
1 - ? - 5V
2 - 34 - PA13 - Default: PA13 Alternate: IFRP_OUT, SWDIO, SPI1_MISO(5)
3 - 37 - PA14 - Default: PA14 Alternate: USART0_TX(3), USART1_TX(4), SWCLK,SPI1_MOSI(5)
4 - GND
5 - 43 - PB7 - Default: PB7 Alternate: I2C0_SDA, USART0_RX, TIMER16_CH0_ON
6 - 42 - PB6 - Default: PB6 Alternate: I2C0_SCL, USART0_TX, TIMER15_CH0_ON
It seems to differ from the one found on pictures in that it has 8 dip switches instead of 6, with last two not described.
pictures are here https://www.cnczone.com/forums/membe...s-hbs860h.html
I have three questions:
1) Has anybody seen this, managed to access its settings? how?
2) Can someone who has some version of HBS* controller provide a dump from the serial port of the session when he opens the connection, reads settings, changes something and save them? (with any serial monitor like https://www.com-port-monitoring.com/downloads.html - there are a lot of different free apps for that)
3) Can someone who bought any HB* driver (can be HB860H, HBS860H , HB86H or HBS57) and confirmed that it works with any tuning software provide a link to the seller and precise info on the model? (and preferably cable)
I know that there is a different version of the drive/board with a TMS320F28035 CPU - does it work with ProTuner? I know _some_ work, because there are YT videos, but they usually bought kits.
Cheers,
MK