512,393 active members
2,733 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Dec 2008
    Posts
    27

    Angry STAR ECAS w/Iemca Genius 120?

    Anyone have experience running small stock (0.094 - 0.15) using this type of bar feeder? I've heard since it is based on gravity quite hard to setup for smaller stock. We have never had too much a need to run in auto till now and of course the bar stock of choice has to be tiny.

    Thanks in advance.

  2. #2
    Registered
    Join Date
    Oct 2008
    Posts
    108
    We have run very small stock with the Genius 120 over the years. You really need the small bar kit for it, but it works fine.
    www.atmswiss.com

Similar Threads

  1. Star ECAS 20/32
    By DCogswell in forum CNC Swiss Screw Machines
    Replies: 1
    Last Post: 08-15-2013, 12:16 PM
  2. Hanwah ML12 & Iemca Genius 112???
    By MX1 in forum CNC Swiss Screw Machines
    Replies: 4
    Last Post: 12-23-2011, 10:08 PM
  3. Star Ecas Programmer
    By Brian Cerkas in forum Employment Opportunity
    Replies: 0
    Last Post: 10-21-2010, 08:14 PM
  4. Bent bar stock jams Iemca barfeeders on Star Swiss Machines
    By pneumadyne in forum CNC Swiss Screw Machines
    Replies: 9
    Last Post: 04-15-2010, 11:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •