[cncone]

Hello All,

I just purchased a 1996 Torq Cut 22 VMC.

Does anyone have or know where I can get a set of manuals for this machine?

As a minimum I would like to get installation, maintenance and schematics manuals.

Thanks,

Ed

[CTAC]

Hello All,

I just purchased a 1996 Torq Cut 22 VMC.

Does anyone have or know where I can get a set of manuals for this machine?

As a minimum I would like to get installation, maintenance and schematics manuals.

Thanks,

Ed

PM me your email address and I'll send you the pdf's. Not sure if I have the schematics in PDF, but I do have the user and programming manuals. There are 3 manuals we have for our TC 22 machine: user-programming-maintenance if I remember the names right.

[cncone]

Thanks tacdriver,

PM sent

[thompson_chop]

PM me your email address and I'll send you the pdf's. Not sure if I have the schematics in PDF, but I do have the user and programming manuals. There are 3 manuals we have for our TC 22 machine: user-programming-maintenance if I remember the names right.

I know this is an old thread but going to try anyway. Is there any way I can get a copy of these manuals for the Torq Cut 22?. I would be very grateful.

[CTAC]

I know this is an old thread but going to try anyway. Is there any way I can get a copy of these manuals for the Torq Cut 22?. I would be very grateful.

Not a problem, follow the link below to the box.com file site. I would simply upload them to this thread, but they are too large. The only manual I don't have scanned in is the one with all the schematics as it is too big for our scanner. But I have the programming manual and some training docs available, and some of the schematics for another member that was doing some power wire changes. Here's the link.

https://app.box.com/s/pv6eg6135fo8rpjn2i6u

[Marty_Escarcega]

Not a problem, follow the link below to the box.com file site. I would simply upload them to this thread, but they are too large. The only manual I don't have scanned in is the one with all the schematics as it is too big for our scanner. But I have the programming manual and some training docs available, and some of the schematics for another member that was doing some power wire changes. Here's the link.

https://app.box.com/s/pv6eg6135fo8rpjn2i6u

While old, I wanted to say thanks for leaving the manuals up for as long as you have.
They are helpful to new Torq Cut owners.
Marty

[cncone]

While old, I wanted to say thanks for leaving the manuals up for as long as you have.
They are helpful to new Torq Cut owners.
Marty

Marty,

I purchased a manual with schematics and theory of operations for my torq cut 22 from EMI, their website is emiworks.

I think it cost about $150 but that was a few years ago.


Ed

[timgo]

Hello All,

I just purchased a 1996 Torq Cut 22 VMC.

Does anyone have or know where I can get a set of manuals for this machine?

As a minimum I would like to get installation, maintenance and schematics manuals.

Thanks,

Ed

Go here ask Pipe:
Manual bridgeport torq-cut 22

[Marty_Escarcega]

Marty,

I purchased a manual with schematics and theory of operations for my torq cut 22 from EMI, their website is emiworks.

I think it cost about $150 but that was a few years ago.


Ed

Did you read down the thread?
While all the schematics are not there, some good info can be found
https://app.box.com/s/pv6eg6135fo8rpjn2i6u