[fireminime3]

I am making some brake calipers for a school project, and have drawn up the part in solid works and input it into mastercam. The problem I am having is trying to do a surface tool path, I have done them before using the create surface from solid function, but with this part it won't let me select some of the surfaces. Would anybody be willing to take a look at the part and help point me in the right direction, I can message or email you the step. Or parasolid file.

Thank you on advance

[WallyL7]

Go ahead and post it here. I'm sure someone will look at it and point you in the right direction.

[fireminime3]

Thanks for the reply. here is the file, i believe i did it correctly, let me know if not.

[txcncman]

First, you should seriously consider redesigning your part using standard sizes for fillets. A 0.1989" radius is not standard. Might work great for casting. But to make the machining more efficient, thus more cost effective, change these to standard.

[fireminime3]

ok i will change the fillets, i hadnt thought of that. Any ideas on the surfacing tool paths?

Thanks

[metalmansteve]

"activate solid selection"

"select face"