In the parameters something must have changed but I simply can not find it, I have a HAAS VF3, If I write a simple program say:

G00 G53 x-20.-y0.0 z0.0
s1300 m3

Now say I just want to use the s1300 m3, I was able to just go to the s1300 m3 line and push the start button and I had spindle on. But now if I go to that line and push start button it jumps to the top an runs G00 G53 x-20.0 y0.0 z0.0. what changed.:wee: My guess is someone changed a parameter but I don't have a clue as to which one. any suggestions would be helpful.