Any one know where I can find a programming manual for Cincinnati Arrow 500 series 18i-M?
Any one know where I can find a programming manual for Cincinnati Arrow 500 series 18i-M?
Krippelz,
You didn't specify the controller in your machine, so this link may help:
http://websystem.gismo.se/gismo/file...G%20MANUAL.pdf
BTW, did you attend Aurora East High School (IL)? Someone with the last name Krippelz also attended circa 1976.
yarzer
I am assuming that he means a Fanuc controller when he said 18i-M.
flyinphill,
U could be right, but that's why I asked; I've not played around with Fanucs since at least '96 or so. I'm not very familiar with Cincy's products other than a few specials like TC-40s or XL-75s. The first is equipped with an A2100, the second with an A950. We used to have another set of XL-75s that had an A900, but sadly, we sold them.
yar_seliva
Yar, I should have known where you were when you said Aurora and 75XL.... I supplied the motors and drives on those machines way back when, and updated the HMC (cart) servo drive back in 2006 for Mag - small world!