[Filippos]

Hello, I want you help!!!!!

I have a small 2.5 axis CNC milling machine and I want to cut the circular profiles not with G02 or G03 but with G01 (many small lines). I create a post for this machine but, I don’t know (at the code wizard in Edgecam 2012 R1) how regulate the circular profile into many small lines in order to cut it with G01 command.

Many thanks!!!!!!!!

[BAMCNC.COM]

I'd assume there should be something that says "output linear segments as arcs" turn that off.

[Filippos]

I'd assume there should be something that says "output linear segments as arcs" turn that off.

Many thanks for your answer....

by I haven't see something "output linear segments as arcs" option at code wizard or at operators parameters at edgecam....

[meegers]

Easiest way to do this is go to the machine tab of your post and set the 'arc planes' field to 'none'. See jpeg.

[Filippos]

ok many thanks.........................