[Nick The IT Guy]

Hey guys, we've recently replaced all of the PCs and laptops in our maintenance department, and they need Motion Link Plus installed on them for
our Cincinnati Arrow 1000 and Arrow 750. I've Googled here, there, and everywhere trying to find an installer, but have come up empty.

If anyone here could point me in the right direction, it would be a huge help.

[mike_Kilroy]

Two things:

1) you do NOT want MotionLink Plus for your servo axes - for them, if BLue drives (SE10/AS10) you need MotionLink, available freely here:

http://www.kollmorgen.com/zu-za/prod...vgui4.5.2-txt/

2) MotionLink Plus is for our VFS5 spindle drive and also freely still available here:

http://www.kollmorgen.com/zu-za/prod...ssioning_rev1/

Let me know if I can help you more.

[slowlearner]

Mr Kilroy is the go-to guy. He has helped me many times for many years.

[Nick The IT Guy]

That did the trick guys. Thanks!

[douglas3r]

That solution arrived?
Date: Mar 2016

[hotrunner]

Two things:

1) you do NOT want MotionLink Plus for your servo axes - for them, if BLue drives (SE10/AS10) you need MotionLink, available freely here:

http://www.kollmorgen.com/zu-za/prod...vgui4.5.2-txt/

2) MotionLink Plus is for our VFS5 spindle drive and also freely still available here:

http://www.kollmorgen.com/zu-za/prod...ssioning_rev1/

Let me know if I can help you more.

Hi Mike

this motionlink plus is only for 32 bit?? or exist motionlink plus for 64 bits???

thanks

[mike_Kilroy]

Hi Mike

this motionlink plus is only for 32 bit?? or exist motionlink plus for 64 bits???

thanks

correct 32bit only. these are 1980 programs! they will not work in 64 bit machines, and they will not work in many 32bit win 7+ machines either.

XP is your friend for 1980 programs!!