[scojoes]

There is probably a simple solution to my problem. Using gibbscam, how do you define a lone cirle for cutting a round pocket. The line that makes the cirlce has to be blue for me to use it for machining and I dont know how to define it and make it blue.

[txcncman]

It does not have to start as blue. Select your tool. Select your machining tool path type. Single click on the circle. Set parameters. Click Do It.

[Machiner1]

Ya "DO IT "

[jvangelder]

A circle not connected to anything else will be yellow, and you can still generate tool paths from it

-Jacob