Hi all,
Can any one point me to set of end mills with 6mm shanks? something like 1mm - 6mm end mill all with 6mm shank. :banana: build done now time to make some dust. I have an old Bosch router with only 6mm collect.
Cheers
Hi all,
Can any one point me to set of end mills with 6mm shanks? something like 1mm - 6mm end mill all with 6mm shank. :banana: build done now time to make some dust. I have an old Bosch router with only 6mm collect.
Cheers
I would look into the PreciseBits collets, which should give you some options. I have never seen a set like you describe, though it might exist somewhere. Amana sells different reducer bushings.
I did a search on Amazon for "Amico 6mm shank end mills". This is what I got: (link didn't work but, hopefully, the search will)
Hope this helps.
You can buy these sets from some not real premium sellers. If you have a router than I think you use it only for wood or plastics. In these case nearly all carbide endmill sets will do. But dont try steel tools.