[jmomathews]

Hello everyone,
I need a quote for two mild steel counterweights with a 10-32 tapped set screw hole (See attached .pdf). All tolerances are stated in the drawing and parts can be made from 1.5" bar stock if easier due to outer tolerances not critical. If you have any more questions or need more information please let me know. Shipping to Upstate NY area.

Thank you for your time,
-Justin

[IHscout]

Hello everyone,
I need a quote for two mild steel counterweights with a 10-32 tapped set screw hole (See attached .pdf). All tolerances are stated in the drawing and parts can be made from 1.5" bar stock if easier due to outer tolerances not critical. If you have any more questions or need more information please let me know. Shipping to Upstate NY area.

Thank you for your time,
-Justin

Justin

I can do your parts for $45.00. This includes shipping to you. If you like, please send me an email at [email protected]

They can be in the mail on Friday.

Thanks,
Shane Stephens

[azmachining]

You must live on ramen...

[jmomathews]

Job Awarded, Thank you all for your time and quotes.

-Justin