[Seifter]

Hallo

I'v buy 2 YASKAWA SERVOPACK SGD-02BPY38 SERVO DRIVER 100VAC.

The driver work very well,but i'v problem whit PC connection.

I'v download SVMON_2-1r3 and do the cable RS232 with the scheme from manual:

MALE(SERVOPACK) FEMALE(PC)

2------------------------------->2
4------------------------------->3
9------------------------------->5

|-4
|-6

FG CASE------------------------>CASE

|-7
|-8
|-1

But the pc don't see the driver,the software tell me that the servopack is disconnected if i whont do offline.
Have anyone experience?
Thanks for help

[Mike Nash]

This is what I have on the SGD cable and I think it is what I wired mine from, but it has been awhile back.

[Seifter]

Thank you,I'll try to do the same cable.

Best Regards

Giancarlo

[Seifter]

Work!!!

The connection in your scheme is the same of my,but i'v do one error,i'v connect the pin 6 to 5 not 9 to 5.
When I checked the connection with your scheme, I realized the error.

Thank you

Best Regards
Giancarlo

[Mike Nash]

I'm glad you got it working.

Mike