[adamfilip]

I am looking to source a Budget 4'x8' CNC
my budget is approximately $10k all in.
something ready to go.. not DIY

My cut volume is low,
Looking for something reliable, and very accurate
speed isnt super important

Looking for low power draw

looking to cut up to 1" thick MDF and Ply, HDPE, PVC, ABS, Acrylic, possibly aluminum,

anyone know of any products I should look into

[mactec54]

adamfilip

I know of one in Canada that just might be a fit for you, I have sent you a PM

[Zhang Luying]

Hi. I just sold one set of CNC machine to a customer of USA this month. Working area: 1300x2500 mm i.e. 4x8', aluminum table(but customer needs vacuum one), Taiwan ball screw, Origin NcStudio control system. 6.0kw water cooling spindle, Taiwan vacuum pump, ect. And, the total value+shipping cost is about 10, 000USD.
I could send the configuration list to you for reference.

Email me freely.

Best regards,

Zoe
[email protected]

[grace chen]

I am looking to source a Budget 4'x8' CNC
my budget is approximately $10k all in.
something ready to go.. not DIY

My cut volume is low,
Looking for something reliable, and very accurate
speed isnt super important

Looking for low power draw

looking to cut up to 1" thick MDF and Ply, HDPE, PVC, ABS, Acrylic, possibly aluminum,

anyone know of any products I should look into

hi
could you tell me the max. size of materials you process?So i can recommend you the suitable modle. more request in details can be talked with me by SKYPE:graceqiqi3 or msn:[email protected].

ALSO can email me all your requests at [email protected]

Regards
grace

[JackLiang]

Hello Adamfilip,
It's Jack from OMNI CNC, could you inform me the thickness of the Aluminum?
You can get 20 wood cutter tools for free from us, but after you tell me the thickness of your Aluminum I can choose suitable cutter tools and recommend you spindle.
it will be better if you send to me your productions pics, so I can choose most suitable machine configurations and give you reasonable price.
You will get high configured cnc router from us according to your budget.
please send email to [email protected], so we can talk about this machine.

[GWEIKE-LASER]

I am looking to source a Budget 4'x8' CNC
my budget is approximately $10k all in.
something ready to go.. not DIY

My cut volume is low,
Looking for something reliable, and very accurate
speed isnt super important

Looking for low power draw

looking to cut up to 1" thick MDF and Ply, HDPE, PVC, ABS, Acrylic, possibly aluminum,

anyone know of any products I should look into

HI Adamfilip
Please conside our cnc router WK1325.
It can meet your requirement very well.
Attachment is the picture as your reference.

For more details please contact me on skpe:ms.leizhang.

[cambosoup99]

dont buy anything from china,

cncrouterparts.com build it yourself.

[mactec54]

cambosoup99
dont buy anything from china,
cncrouterparts.com build it yourself.

You obvious have not seen or used a machine from Guangdaly, You could not build a 8' to 10' machine for the price of there complete ready to run machines

Full steel machine, welded construction,Heat treated & machined for linear rails Etc, Linear rails are Hiwin all axes, Hiwin ballscrew on Z axes, ER32 spindle, stepper or servo & much more

[cambosoup99]

i wouldn't buy anything from china period. unless it they had an office in the usa. where issues could be taken care of. see my build log and you'll understand. but hey, you spend your money the way you want too.