[Grzesiek]

hello friends !

Im looking for parameters for MATRA TM-20C turning machines on FANUC O-T series control. I have a problem witch memory board, and after clear the memory I lost the parameters.

Any help would be greatly appreciated

Grzesiek

[Grzesiek]

hello again !

i recive parameters, but from diferent machines (TC35). After correction DIAGNOSTIC and SERVO PARAMETERS the machins work, but i have a problem. The spindle rotation is displayed double ( for example if i write S240 i have a 480 rpm ), and the lamp "MC alarm" is flashing - but there is no alarm on the display, and machine work.

I loking for parameters manual for fanuc 0T-C. ( i have the book from fanuc 0T-C series, but in german language - this language i completly don't understand )

Any help would be greatly appreciated[/LEFT]

[Al_The_Man]

PM sent, you also may have lost the 900 parameters which are the machine options.
As well as counter timer data.
Al.

[roymanvega]

Need Help - Lost all parameters of Nakamura TMC15M w/ Fanuc OT controls 1991 model lathe machine.. please if anyone have a copy of same machine parameters can you give me a copy, i already contact MTB but they sad they dont have anymore copy of parameters for this machine.. any help we really appreciate..

[dali_290]

Hello .
Does anybody have programing manual for Johnford TC-35. Or Matra TC-35 ? Controll FANUC OT-C.
I need very urgently mainly list of all M and G codes. PLs help.

[Al_The_Man]

You can get the G codes from the Fanuc manual, the M codes are reliant on the MTB.
Send a PM with email add if you need the manual.
Al.

[dali_290]

here is all i got from the machine

[dali_290]

what is MTB ?