Hello Bobcad community, new member here.
I have a question I'm hoping maybe a few of you polished users may be able to answer.
I'm trying to cut a compound angled surface using slice planer. To me, this seems to me this outta be a no-brainer but Bobcad disagrees.
I want to start at the top of this surface and do zig zag moves all the way to the bottom using a 1 inch bull nose endmill with a .25 corner radius. Is this possible using Bobcad? Am I missing something thinking this should be a real simple operation?
Based on the top view, it appears the toolpath wants to stay within the confines of the geometry looking at it in a "normal to" view, which prevents it from moving all the way down the said to the bottom.
Any thoughts, ideas, and/or opinions would be greatly appreciate it.
Thank you,
Jim
I may have posted this in the wrong section. If so, could a moderator please place it in the correct location. Thank you.