[NC Programmer]

Integrex 300 IV-S, single spindle, programmable tail stock.

We are attempting to position our tail stock via our EIA program. We've set our tail stock position #1 value and then used M741 to position it. As soon as it touches the work piece, we get an alarm "326 Tail Position Malfunction". I don't see this alarm listed in our manuals, so trouble shooting this has been difficult. We've tried this both with and without an M731 before it. Anybody else come across this or know what may be causing our issue?

[Night Shift Wiz]

Last time we had that alarm it was a problem with the parts catcher not making a prox switch but giving a tailstock alarm instead.