Hi
Do any of you know where I can find a nice detailed 3D solid drawing of an Audi TT?
My plan is to mill a small copy.. :idea:
Thanks ahead!
Hi
Do any of you know where I can find a nice detailed 3D solid drawing of an Audi TT?
My plan is to mill a small copy.. :idea:
Thanks ahead!
there are some 3D drawings available...
the place to ask is on http://www.tt-forum.co.uk but I'll have a look round for you...
or you could just have the real thing
If you're in Europe why not come and visit the UK CNC Community at http://www.mycncuk.com
hmmm... the one that was there has been removed, for copyright reasons I suspect...
you can buy the 3D models from various places for about $70 e.g. http://www.3dcadbrowser.com/browse.a...e=2&category=2
or $16 http://www.linefour.com/3D-CARS/Audi...uct-flyer.html
or free here: http://www.sharecg.com/v/7808/3D-Mod...e-3d-max-model
let me know how you get on..
If you're in Europe why not come and visit the UK CNC Community at http://www.mycncuk.com
The sketchup model warehouse has some good TT's.
If you need higher res/quality mesh, try turbosquid
hello
my first post!
have you find what you want
i've modeled (draw in 3d) one in solidworks
Hi, I have not found one yet. Will you post it to me? ;-)
no problem
what format: stl, iges, ... ?
do you have a cnc, i want to buy or build one
I should be able to read solidworks files but maybea its an idea to try .stp .stl .iges ... Sometimes it can be hell to make convertions work ;-)
I have a Supermax FV56 A and a Deckel FP2 NC.
Is it for hobby or prof. use?
Hi, I cant se anything in my mailbox.. did I PM you the right adress..
check again
i will put everything on a ftp site (too big for email maybe)
give me 10 mn
I do a bit of basic 3D modelling using Cinema 4D and I have been looking round for a model of a Audi TT , I have tried creating my own, but they have all been dreadful! There are a few places that sell very good models, and I try to buy oneAudi TT 3D car model! I would truly recommend that for you too !:cheers: There is important quality I think so. Especially when you are going to use 3D model somewhere Bye for now